Dremel 395 Arbor Press Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount allows a Dremel 395 to be mounted onto an arbor press to act like a miniature drill press.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This mount allows a Dremel 395 to be mounted onto an arbor press to act like a miniature drill press. It has been remixed from the source design to work with 8-32 nuts and screws and optionally a 1/4-20 bolt can serve as a depth stop.
I suggest a fairly high infill ( I used 50%) and two or three perimeters. Supports are required for the mount, but it doesn't use much material.
If using the depth stop hole, clean it up with a tap.
A step version is included to ease adapting it to other presses (mine is an old Harbor Freight model) and adding improvements.