Dremel 395 Arbor Press Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount allows a Dremel 395 to be mounted onto an arbor press to act like a miniature drill press.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 45
- Makes
- 0
- Views
- 759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This mount allows a Dremel 395 to be mounted onto an arbor press to act like a miniature drill press. It has been remixed from the source design to work with 8-32 nuts and screws and optionally a 1/4-20 bolt can serve as a depth stop.
I suggest a fairly high infill ( I used 50%) and two or three perimeters. Supports are required for the mount, but it doesn't use much material.
If using the depth stop hole, clean it up with a tap.
A step version is included to ease adapting it to other presses (mine is an old Harbor Freight model) and adding improvements.