GK420d & GX420d Right Bearing (Roller clip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right bearing roller clip for GK420d & GX420d thermal zebra printers. Hole was widened for a smoother spin.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Right bearing roller clip for GK420d & GX420d thermal printers.
The original was too tight for me so I widened the hole a bit.
Original can be found here: https://www.thingiverse.com/thing:3689058
If you're looking for the left clip, you can get it here: https://www.printables.com/model/367011-gk420d-gx420d-left-bearing-roller-clip
Slice with the tab in the upright position as shown in the rendering. Supports are necessary
Slicer settings
Layer Height: 0.2
Infill: 100%
Support Placement: Touching Buildplate
Support Overhang Angle: 30°
The printed pieces shown were printed with a 0.6 nozzle. While it worked ok, I would recomend a 0.4 nozzle. Presliced model uses a 0.4 nozzle
Fit can be a little tight at first but after some repetitive movements, it loosens up nicely.