GK420d & GX420d Right Bearing (Roller clip)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Right bearing roller clip for GK420d & GX420d thermal zebra printers. Hole was widened for a smoother spin.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 174
- Makes
- 0
- Views
- 481
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
Right bearing roller clip for GK420d & GX420d thermal printers.
The original was too tight for me so I widened the hole a bit.
Original can be found here: https://www.thingiverse.com/thing:3689058
If you're looking for the left clip, you can get it here: https://www.printables.com/model/367011-gk420d-gx420d-left-bearing-roller-clip
Slice with the tab in the upright position as shown in the rendering. Supports are necessary
Slicer settings
Layer Height: 0.2
Infill: 100%
Support Placement: Touching Buildplate
Support Overhang Angle: 30°
The printed pieces shown were printed with a 0.6 nozzle. While it worked ok, I would recomend a 0.4 nozzle. Presliced model uses a 0.4 nozzle
Fit can be a little tight at first but after some repetitive movements, it loosens up nicely.