Google Nest Thermostat Heat Link Pattress/Adapter for Standard UK Back Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allow for mounting a Google Nest Thermostat Heat Link to a standard UK back box
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 1007
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you purchase a current generation Google Nest Thermostat, to fit the Heat Link component, it comes supplied with a couple of screws which are (presumably) intended to be used with wall plugs that you supply and fit as the end user. Mains power is supplied via a flex that protrudes from the bottom of the device, either with a plug on the end or to some other outlet. For a superior installation, it is better (IMHO) to install a switch and route the power through a fixed line via a metal back box. It's possible to do this using the aforementioned supplied screws and holes in the wall, but it would be neater if the Heat Link would interface directly with a standard UK back box, which is what this 3D print is for; to adapt a Nest Heat Link to a UK back box.
To fit the Heat Link to the adapter, you'll need a couple of 20mm M4 cap screws and nuts. The adapter itself screws to the back box using standard M3.5 electrical screws.
https://timang.us/2023-01-08-nest-pattress/