1 / 2
Spacer for Garmin bicycle satnav on tapered handlebars — zdjęcie 1
1 / 2

Spacer for Garmin bicycle satnav on tapered handlebars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The mount of my Garmin Edge 200 sat at an weird angle because of the taper of my handlebar. It also sat so low, that I…

Ocena
0 / 5
Polubienia
2
Pobrania
23
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The mount of my Garmin Edge 200 sat at an weird angle because of the taper of my handlebar. It also sat so low, that I hit the stem whenever I tried to attach the satnav to it, so I designed this spacer.

The wider part of the taper is ~25mm in diameter, the narrower ~23mm; distance between these two measuring points is 34mm. Both measured at the handlebar. I've added 1mm to the cutout on the spacer for padding (I used a piece of an old motorcycle tube).

It is a little tricky to print due to its organic shape. I used a raft + supports and that worked pretty well.

Category: Sport & Outdoors

Tagi