Spool Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool adapter for smaller spools that don't fit in the Bambu Lab AMS box.
- Ocena
- 4,714 / 5
- Polubienia
- 59
- Pobrania
- 735
- Wydruki
- 9
- Wyświetlenia
- 2679
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter is to allow the use of spools smaller than Bambu Lab's spools in the AMS box. This adapter should fit any spool with a diameter of less than 200 mm and a width of less than 56 mm. This adapter could help add more weight to smaller spools, so they are more stable when using non-axle spool holders as well. I have uploaded the .STEP file. Feel free to adapt the model to your needs.
Any material should work except flexibles. All of mine have been printed with PLA.
Instructions:
Print both Rim sides A and B
Place the spool onto the threaded axle of side A
Then screw side B onto side A until it is tight against the spool. Make sure that the sloped side of side B is facing the spool.