Spool Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool adapter for smaller spools that don't fit in the Bambu Lab AMS box.
- Rating
- 4.714 / 5
- Likes
- 59
- Downloads
- 735
- Makes
- 9
- Views
- 2,679
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This adapter is to allow the use of spools smaller than Bambu Lab's spools in the AMS box. This adapter should fit any spool with a diameter of less than 200 mm and a width of less than 56 mm. This adapter could help add more weight to smaller spools, so they are more stable when using non-axle spool holders as well. I have uploaded the .STEP file. Feel free to adapt the model to your needs.
Any material should work except flexibles. All of mine have been printed with PLA.
Instructions:
Print both Rim sides A and B
Place the spool onto the threaded axle of side A
Then screw side B onto side A until it is tight against the spool. Make sure that the sloped side of side B is facing the spool.