Counting matching models…
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
In the original model I was annoyed that the size 0.4 appears twice so I removed the duplicate and merged them
Printed on my P1S with AMS and 0.6 nozzle with default settings.
Save filament instead of Poop! I surprisingly use a lot of little shims in all sorts of situations to add stability to an uneven part or to space things or whatever. When printing in multicolor in Bamboulabs you can select a file and…
From the model, I removed the magnet pockets from the underside and eliminated two sockets, leaving only the most commonly used ones: 0.2, 0.4, and 0.6.
Hi! I'm new to 3d printing and designing and I made these models in about 2 hours with my friend's help. Feel free to sell these but you must give credit to me (augdog974) and you may not reupload or remix. Thanks for downloading and…
this is a work in progress. the product does function as it is. all holes are tapped by the screws when putting it together. currently i have printed in asa and it worked but did eventually fail. Printed horizontal with supports if…
It works by inserting a one-inch PVC pipe cut to length to create the complete model. You place the PVC on top and then slide on your roll of filament. It uses a one-inch PVC pipe, cut to length.
With the stock metal rear spool holder I would sometimes get a squealing noise as my plastic spool would turn on it. I decided to design an improved holder so that I could avoid those noises. This improved spool holder reduces friction as…
Update: 17/11/2022: Added a version of mount to guide filament via PTFE. The connector is M4-PC10. I liked Printer J's spool holder however I had a few spool holders using HugoHuge Filler spool holder. So I remixed it by using the mount…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
0.2 mm layer height I have made a Gcode for the Bambulabs with paint-on support for direct print. I also have upoaded Gcode for a multicoloured version
Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…
A work in progress on some custom side panels for the yet to be released BambuLabs P1P, based on the recently released CAD files for the printer, Have yet to have the opportunity to test any of these files. holes designed for use of an m3…
I painted this model so you can print it in color on a BambuLabs printer.
Catch that filament poop! This is a small, minimal poop basket remix in which I made only two simple changes: Magnet holes have been adapted for 6mm x 3mm magnets The BambuLabs logo has been embedded on the outside of the bin 3 versions…
Print body vertically with a brim Print Base flat on the build plate Slide in and bend slightly to get the notch in. Notch stops the slider from sliding out. use double-sided tape to attach to the printer. Update: V2 Added with additional…
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
Bambu Labs X1C HEPA Magnetic Filter modified to fit around the original AMS assembly. This is loosely modeled after Lemanito's Filter as shown in the below link.…
I saw this thing, and I liked this thing, but I wanted a different thing! So I made a new thing using two things that I liked! :) Included are the links to the two original different models I combined here. They are free models but you…
I've printed a Rook 3D printer, and decided to use my spare bambulabs hotend on it. This is for a bowden setup, and as per the stock Rook design uses bed-mounted layer cooling. This can use either the standard bambu (5V) fan, or using the…
Built for Wyze Cam V2 but should fit the V1/V3 as well, I think they have the same base. Clips onto the right side and locks into place by sliding down.
Still in Beta, requires some testing to make sure everything works well. Requires m3x50 BHCS, heatset inserts, and 4 m2x12 screws. Modified Long's Mantis X Carriage with KlickyNG. Mini Sherpa Extruder. Bambu Hot End. 4010 Blower Fans.
I made this keycap as a replacement for the Windows key for Corsair mechanical keyboards as entry into Prusa's keycap contest. Have fun with printing it! I learned a lot of new stuff making it :)…
This is a humble remix of WagZ's remix. The fitment for the PCB connector is better, the PCB retainers are more prominent so the PCB snaps in. Rather than printed clips there are holes to accept a zip tie. I found the clips could break…
ENG: This is a wall mount for an AMS from BambuLabs. This is used to mount one or more AMS on top of each other or side by side on the wall. This can be useful if you have very little space and still want to use the work surface under the…
If you have P1P and you printed ARC enclosure you might need Beagle Cam mount for it. It is remixed door hinge - I have installed it on the upper one. It is based on ARC hinge v3, not v4
On the Bambu Labs X1C glass door, there is a small black rubber washer to keep the door from vibrating. I lost mine while doing maintenance; so I modeled a new one. Nothing fancy here just a replacment part. TPU high recomended .10mm…
Wyze holder for ARC enclosure P1P Bambulabs It is based on ARC v3 hinge, not v4
Only uses 60 grams of filament! Tired of running into issues with spools, and don't want to spend 600g of filament printing the Hydra AMS and ripping apart your AMS just to rebuild it? (No hate, I love the design.) This riser for the lid…
I need the spool mounted alongside the backplane of the printer, so I have remixed the nice design fom BC. In fact only the spool-roller was untouched, the mount itself has been redesigned. It should be possible to further reduce…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
I wanted to use my 8mm (3mm depth) magnets for this also remixed the bin to have 6cm overall width
This is a longer rod to be used on the BambuLabs X1/X1C Improved Rear Spool Holder. https://www.printables.com/model/289720-bambulabs-x1x1c-improved-rear-spool-holder I thought the use of 4 bearings was a little overkill, so I created…
update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…
Side mount for AMS Hub on the Bambu X1 - was tired of having to move the printer to release ptfe tube. Uses your existing cables with the hub. Uses existing holes, fit with M3 bolts. 1h 18print time. Feel free to adapt, just credit me,…
F3D file included, easy to remove euclid mount point if required, although neither it or the input-shaper affect travel. MiniAftersherpa - https://github.com/PrintersForAnts/Mini-AfterSherpa Shaper -…
This model fits all of the accessories that come with the X1C and AMS accessories/replacement parts bundles. The rightmost slot can fit both the smaller square boxes as well as the larger rectangular boxes and both fit snugly. The middle…
I have anti-vibration feet on my P1S so my current poop bin doesnt sit on the surface, and the magnets fitted werent strong enough to keep it in place securely. Thats why I decided to remix this model to increase the magnet holes, and now…
Simple version of an AMS riser with simple butterfly locks to hold together and provision for Led strip lights Material ABS at 0.3 layer height, have included Orca slicer build plates and use some tree supports for the under edge and some…
Same as my previous version except the back is more print friendly being mostly 45 degree angles
I have here the Extendet Remake again Remake'd
bambulab x1 carbo door knob JUST WAS BORED of the x1 stock knob so i whipped this up super simple print looks wild when you ise ams LET ME KNOW WHAT YOU ALL THINK
Simple model of an attachment to mount the QR stickers on the aftermarket build plates, found no easy way to make the QR code stickers stay permanently attached to the build surface. Found this way you can use a little glue stick on the…
There are already a lot of other LED-Riser frames for the BambuLabs X1C out there. So here is what makes my version special: gives additional headroom for the bowden hose so filament will hopefully never again break at the extruder when…
I had a spare X axis and attempted to reverse engineer it to maybe use in another printer. It's not 100% complete or perfect, but should be an ok reference for someone.
Adapter made with Fusion360 thinking on calibrated weights usage for the Bambu Labs AMS based on the adapter from elmaker Design This helps avoiding rewinding issues when finish printing or changing color putting more weight on the spool…
I designed this hub to rewind filaments from other manufacturers on the bambulabs spools. these have a added slot for the filament chip, you can still use the chip if the color and materiaal are the same. i use the ‘’Awesome Filament…
18.12.2025: On indefinite break from Printables due to work & family - cannot provide support of any kind at the moment. My apologies & thank you for your understanding. A simple X1/P-series hotend assembly holder for Ikea Skådis…
A very basic model that I designed in Inventor (.ipt included), to store the hotends for the A1 & A1 mini printers. The holder makes use of the magnets on the back of the hotends (be aware though my 0.6 & 0.8 hotends had the magnets…
A simple 2x1 Gridfinity box that can store 4 bambu lab's filament wiper and 5 filament cutter spare parts.
A slightly modified version of the Modular Filament Drawer System. slightly narrowed to fit on a Bambu X1 or P1 printer. You'll need to modify the face plate/drawer front yourself to reflect the change Note: You'll need to centre it on…
"PrintBed" Brand Adapter for Bambu Labs Spools: Seamless filament feeding for smooth 3D printing.
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
A large poop bucket for the P1S Bambu Labs printer. I added a handle
Tool Head cable socket on front side PCB is a challenge to align and clamp. Mistakes can short TH and AP boards. This tool helps align and hold cable in place while the clamp is positioned and tighened.
