1 / 7
Atlas Light Switch — zdjęcie 1
1 / 7

Atlas Light Switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I got the idea from "The Pusher", but the design is my own. Designed in Fusion 360 to fit a standard US light switch…

Ocena
5 / 5
Polubienia
15
Pobrania
70
Wydruki
1
Wyświetlenia
342
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I got the idea from "The Pusher", but the design is my own. Designed in Fusion 360 to fit a standard US light switch like the one in the picture. Enjoy!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

10% cubic, less is fine

Filament: Inland PLA+

Notes:

Print flat on the side that goes against the wall, the arm is what needs supports. It doesn't have to look good, you don't see the support side. I used tree supports in Cura, it was very easy to remove, comes off in one piece and can go straight onto the wall. I just used a piece of scotch tape and it sticks fine.

Category: Art

Tagi