Atlas Light Switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I got the idea from "The Pusher", but the design is my own. Designed in Fusion 360 to fit a standard US light switch…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 70
- Makes
- 1
- Views
- 342
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got the idea from "The Pusher", but the design is my own. Designed in Fusion 360 to fit a standard US light switch like the one in the picture. Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10% cubic, less is fine
Filament:
Inland PLA+
Notes:
Print flat on the side that goes against the wall, the arm is what needs supports. It doesn't have to look good, you don't see the support side. I used tree supports in Cura, it was very easy to remove, comes off in one piece and can go straight onto the wall. I just used a piece of scotch tape and it sticks fine.
Category: Art