Rattle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple rattle (for music)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This is a simple rattle which can be used in music, the sound can be modified when constructed.
The rattle can't obviously be printed like this, you need to add a pause in your slicer or pause the printer manually when the inside chamber is still accessible, then the desired fill object must be applied. After that, the print can be resumed.
The model does include a bridge, but it's hidden inside so no one will see ;)
This is the pause function in PrusaSlicer (right click the plus button)
Adding the pause at 71mm is a good choice
The recommended fill is some grain-food like rice. Alternatively you can print the
“rough sound alternative.stl” though it gives a rough sound, not what you would expect with a rattle.
To conclude: a finer grain will produce a finer sound and vice versa.