Starlink Internet House entry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "weather proof" entry for the Starlink Dishy McFlatface internet cable. It has a large ferrite core on the…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a "weather proof" entry for the Starlink Dishy McFlatface internet cable. It has a large ferrite core on the power block end so requires a much larger hole than what is needed to accommodate the cable itself. This helps clean up the install. Based off of a 1" hole. I used a spade bit. Either an M3 nut and bolt can be used or a self tapping screw to keep the cap on, there is a cavity to accommodate an M3 nut within the base piece. You would need to pause, place nut, and resume the print in order to use the nut/bolt. Also if you would like the bicolor logo you would also need to do a pause/fliament swap for that. Both are optional but makes for a nicer end result I feel.
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PolyMaker PLACategory: Outdoor & Garden