Starlink Internet House entry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a "weather proof" entry for the Starlink Dishy McFlatface internet cable. It has a large ferrite core on the…
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 124
- Makes
- 1
- Views
- 929
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is a "weather proof" entry for the Starlink Dishy McFlatface internet cable. It has a large ferrite core on the power block end so requires a much larger hole than what is needed to accommodate the cable itself. This helps clean up the install. Based off of a 1" hole. I used a spade bit. Either an M3 nut and bolt can be used or a self tapping screw to keep the cap on, there is a cavity to accommodate an M3 nut within the base piece. You would need to pause, place nut, and resume the print in order to use the nut/bolt. Also if you would like the bicolor logo you would also need to do a pause/fliament swap for that. Both are optional but makes for a nicer end result I feel.
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PolyMaker PLACategory: Outdoor & Garden