[Printer-Box] HEPA Filter Cartridges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable frames for carbon or particle filter elements used in the HEPA housing provided by [Printer-Box].
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One of the options for the [Printer-Box] is a HEPA filter setup. It's designed around some commercially available filter media that simply slides into the slot. I wanted to design up some frames that could hold some of the filter media I already had a supply of so that's what these do.
It takes two of these frame sets to fill the opening in the housing designed by the folks at [Printer-Box].
For the media, I've used a MERV 13 filter cloth and activated carbon filter sheets available in many places online. The material should be cut into a 140mm x 110mm rectangle. It's a little longer than it needs to be so that it can be pleated by the internal ribs as shown below.

Commercially available filters have a lot more pleats and thus more surface area to capture particulate. Which may bet better for you depending on your application.
Caveat: I designed these frames around the Noctua NF-F12 3000 RPM Heavy Duty Cooling Fan. So these fit fine with that. If you're using a fan with larger depth, these won't work. If you're using a fan with a thinner depth, you may need to use some self-adhesive weather stripping to make up the gap.
Tips
- The sliced files are for site metrics only. I would recommend slicing your own to your own needs.
- I used a .4mm nozzle, .2mm layers, 20% infill, and PETG to print my frames. No supports needed.
- These have a tight fit to get the lip to seat into the slot on the two sides. I probably should have eased up on the tolerances, but they will snap together nicely.
- Depending on the thickness of your media, you might have these deform a bit, but they'll be find in the housing.