1 / 3
[Printer-Box] HEPA Filter Cartridges — image 1
1 / 3

[Printer-Box] HEPA Filter Cartridges

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reusable frames for carbon or particle filter elements used in the HEPA housing provided by [Printer-Box].

Rating
0 / 5
Likes
2
Downloads
32
Makes
0
Views
670
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

One of the options for the [Printer-Box] is a HEPA filter setup. It's designed around some commercially available filter media that simply slides into the slot. I wanted to design up some frames that could hold some of the filter media I already had a supply of so that's what these do.

It takes two of these frame sets to fill the opening in the housing designed by the folks at [Printer-Box].

For the media, I've used a MERV 13 filter cloth and activated carbon filter sheets available in many places online. The material should be cut into a 140mm x 110mm rectangle. It's a little longer than it needs to be so that it can be pleated by the internal ribs as shown below.

Commercially available filters have a lot more pleats and thus more surface area to capture particulate. Which may bet better for you depending on your application.

Caveat: I designed these frames around the Noctua NF-F12 3000 RPM Heavy Duty Cooling Fan. So these fit fine with that. If you're using a fan with larger depth, these won't work. If you're using a fan with a thinner depth, you may need to use some self-adhesive weather stripping to make up the gap.

Tips

  • The sliced files are for site metrics only. I would recommend slicing your own to your own needs.
  • I used a .4mm nozzle, .2mm layers, 20% infill, and PETG to print my frames. No supports needed.
  • These have a tight fit to get the lip to seat into the slot on the two sides. I probably should have eased up on the tolerances, but they will snap together nicely.
  • Depending on the thickness of your media, you might have these deform a bit, but they'll be find in the housing.

Tags