Camera mount for DJI O3 air unit on TBS Source One V5 with rubber dampeners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera mount for DJI O3 Air unit with inserts for silicone or TPU dampeners
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 417
- Wydruki
- 0
- Wyświetlenia
- 5297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this to accomodate the O3 camera on the TBS Source One HD V5 frame, i added the slots to fit the silicone inserts from iFlight (https://shop.iflight-rc.com/DJI-O3-Camera-Silicone-Inserts-Pro1916?search=o3&page=2).
I guess you can print the inserts in TPU but i'll not provide the model since it would be a ripoff of the iFlight one.
For mounting you will need 8mm M2 screws.
You can stiffen the mount with 35mm M3 bolts (not seen in the pictures).
If you mount the Air unit in the back you need a longer camera cable, you can find it too in the iFlight shop or Runcam shop
PLEASE NOTE: I didn't fly the drone yet so i'm not sure of the dampening results, as soon as i get the time and weather to get this thing in the air i'll update with a video