Iris Keyboard Rev4 Mid Layer - 1.5mm plates, stand-off free - Integrated Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iris Keyboard Rev4 Middle Layer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Iris Keyboard Rev4 Middle Layer.
I wanted a few changes to the cases on the Keebio Iris Case GitHub:
1) Does not require stand offs, screws thread directly into the layer.
2) Supports not required. I have adjusted overhangs to be beveled, and modeled in supports. See photos for support cross-section (also included is a support-free model).
Designed for 1.5mm plates.
Feedback welcome.
Print instructions
Tested and printed on Ender3 using Filastruder clear PETG, using a .4mm nozzle and .2mm layer height. My prints benefited from a brim to avoid lifting. Supports snap off cleanly. (See support cross-section)
Left hand models provided. (obviously mirror for right hand use).
See "No Supports" model if you want to have your slicer add supports directly.
Feedback welcome.