Tie Fighter Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't use the original design because I wanted a standoff distance from the 608 bearing for the spinner.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 689
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't use the original design because I wanted a standoff distance from the 608 bearing for the spinner. I used the Thingverse files from https://www.thingiverse.com/thing:3009552.
The central part worked fine but the hole for the bearing had too much clearance for my taste. If I were to print it again I'd change the hole size so that it was a light press fit for the bearing. If you prefer to use glue to mount the bearing you could leave the hole as is or still shrink it slightly. The Multi-Material 2S is used to go from gray to black and back to gray but you could change filament manually if you can only print one color.