Tie Fighter Spinner
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.28 – €1.56 net (excluding VAT)
For file: pla-tie_spinner-1h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.42 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I didn't use the original design because I wanted a standoff distance from the 608 bearing for the spinner.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 127
- Makes
- 1
- Views
- 689
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't use the original design because I wanted a standoff distance from the 608 bearing for the spinner. I used the Thingverse files from https://www.thingiverse.com/thing:3009552.
The central part worked fine but the hole for the bearing had too much clearance for my taste. If I were to print it again I'd change the hole size so that it was a light press fit for the bearing. If you prefer to use glue to mount the bearing you could leave the hole as is or still shrink it slightly. The Multi-Material 2S is used to go from gray to black and back to gray but you could change filament manually if you can only print one color.