JOLT REBORN V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I fixed a few key problems of the V1.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I fixed a few key problems of the V1. The first being that the barrel doesn't rotate nearly as much as before due to the two flaps on the sides. It also clamps a little better so it won't just fall off like the old one did occasionally. I also lowered the tab on the back so it will be a better fit with the blaster. I also adjusted the hinge so it won't have any weird angles like mine did. Same assembly as the V1.
NOTE POST ASSEMBLY!: this model works better but it is very fragile like the V1. I will be posting a new version with stronger parts soon!
Print instructions
use the included .gcode and PLEASE PRINT AT LEAST BARREL IN ORANGE OR RED OR PAINT IN THOSE COLORS. there is a pause at height for printing in 2 colors.