JOLT REBORN V2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.04 – €1.28 net (excluding VAT)
For file: jolt-body.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I fixed a few key problems of the V1.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 940
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I fixed a few key problems of the V1. The first being that the barrel doesn't rotate nearly as much as before due to the two flaps on the sides. It also clamps a little better so it won't just fall off like the old one did occasionally. I also lowered the tab on the back so it will be a better fit with the blaster. I also adjusted the hinge so it won't have any weird angles like mine did. Same assembly as the V1.
NOTE POST ASSEMBLY!: this model works better but it is very fragile like the V1. I will be posting a new version with stronger parts soon!
Print instructions
use the included .gcode and PLEASE PRINT AT LEAST BARREL IN ORANGE OR RED OR PAINT IN THOSE COLORS. there is a pause at height for printing in 2 colors.