Kurt Vise Speed Wrenches Updated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pretty typical speed wrench for Kurt and similar CNC or machining vises.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Updated with new 3rd model. New model is thicker and with a taper, better outside edges. Two short and one long styles. made to use 1/2-13 threads. The stub wrenches are thicker, and work better, will hold a little more torque. I turned the handles for these, but you can print them. The threads in the handle are the weak part. Printed in ASA, .2 layer height. Orange is printed in PETG with variable layer height. Use several layers since you have to tap for the handle. I think i used 7 or 8. The included print file has 50% infill i think. That may be a little much, but can't hurt.
if you want to use the print file on a Ratrig 300, you will need to comment a few lines back in around line 1170, you can't miss them. Then one more at END_PRINT, at the end.