Kurt Vise Speed Wrenches Updated
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.10 – €2.57 net (excluding VAT)
For file: PS_RR300_Speed_Wrench_AdaptaveV3_.2_PETG_2h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.33 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.39 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a pretty typical speed wrench for Kurt and similar CNC or machining vises.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 86
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
Updated with new 3rd model. New model is thicker and with a taper, better outside edges. Two short and one long styles. made to use 1/2-13 threads. The stub wrenches are thicker, and work better, will hold a little more torque. I turned the handles for these, but you can print them. The threads in the handle are the weak part. Printed in ASA, .2 layer height. Orange is printed in PETG with variable layer height. Use several layers since you have to tap for the handle. I think i used 7 or 8. The included print file has 50% infill i think. That may be a little much, but can't hurt.
if you want to use the print file on a Ratrig 300, you will need to comment a few lines back in around line 1170, you can't miss them. Then one more at END_PRINT, at the end.