1 / 1
Walksnail VTX Antenna Mount for Armattan Gecko 3"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick little mount that screws on top of the rear frame bolts. There's room to run the power cable in the gap
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed with PETG at .20
No supports required
The diameter of the tube is just barely large enough to fit the end of the U.FL connector. If you have any strings from printing make sure to bore out the antenna tube first