DeWalt Deep Pro Org Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement / color-coding of your DeWalt Deep Pro Org Handle.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Title : DeWalt Deep Pro Org Handle
This is my first public model. Hope you use it. Please let me know if anything i could do better or differently, I'm also new to 3d and I'm an addict.
Description: This is a replacement / color-coding of your DeWalt Deep Pro Org Handle.
I made 2 versions
1-flat
2-ridged end
You could emboss the tool name instead of using a permanent marker but i did not want to edit the file each time.
I print most of my models with brims. First, to secure the print in place and 2 because it's help me fine tune the bed or Z-Offset if needed.
Note that the ridge one should not be printer with a brim as it cover the ridges and its a pain to remove.
Feature:
- Color coded your toolbox
Assembly:
Pop the actual handle cover and replace, might need a screwdriver
Model dimensions:
- Length: 141.5mm / 5.6 inch
- Height: 29.5mm / 1.16 inch
- Depth: 17.7mm / 0.7 inch
Print settings:
- Layer height: 0.2 mm
- Outer walls/perimeters: 3
- Bottom layers: 3
- Top layers: 3
- Infill 15%
- No supports - print face down
- Plate adherence: Brim