1 / 2
ESP32 Case, Box 100x100x30mm for ESP32 and RelaisBoard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for an ESP32 Board and a Relaisboard.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 239
- Wydruki
- 0
- Wyświetlenia
- 2751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (64)Powiązane
created this Box for a Garage door opener using an ESP D1 Mini Controller and a Relayboard.
Stepfile is included to make your own Version.
Layer Height: 0,2mm
Infill: 30%
Material: PLA
M3 Heat inserts used for mounting the Boards and the Cover.
PG9 Cable Glands used for the Cables.