3-in-1 screwdriver with push-through interchangeable bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a screwdriver for 3 small bits. They are interchangeable by pushing them through from below.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please note:
I haven't tested the driver very long yet.
If there are any weak points, I will try to improve them in the future… it might be total crap… let's see ;)
EDIT:
I added a simple version which is printed lying down, takes ~ 30 minutes and has worked very reliably so far. I would prefer this version!
this is a screwdriver for 3 small bits (those with a length of 28mm)
They are interchangeable by pushing them through from below. included is a one-way locking mechanism.
Since I usually don't use more than 3 bits in a project, I thought of building this screwdriver that includes my favorites. it's quick and they're always at hand ;)
my printing settings:
- PETG /PET
- 0.2 mm
- 3 perimeter
- brim
- no support
printing standing takes some time ~ 1:20h
simple version: ~ 30min