3-in-1 screwdriver with push-through interchangeable bits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a screwdriver for 3 small bits. They are interchangeable by pushing them through from below.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please note:
I haven't tested the driver very long yet.
If there are any weak points, I will try to improve them in the future… it might be total crap… let's see ;)
EDIT:
I added a simple version which is printed lying down, takes ~ 30 minutes and has worked very reliably so far. I would prefer this version!
this is a screwdriver for 3 small bits (those with a length of 28mm)
They are interchangeable by pushing them through from below. included is a one-way locking mechanism.
Since I usually don't use more than 3 bits in a project, I thought of building this screwdriver that includes my favorites. it's quick and they're always at hand ;)
my printing settings:
- PETG /PET
- 0.2 mm
- 3 perimeter
- brim
- no support
printing standing takes some time ~ 1:20h
simple version: ~ 30min