1 / 3
BTT SKR V1.4 Turbo Case with 8080 Fan Lid — zdjęcie 1
1 / 3

BTT SKR V1.4 Turbo Case with 8080 Fan Lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom BTT SKR V1.4 Turbo mainboard case with lid for 8080 fan (Noctua Redux)

Ocena
0 / 5
Polubienia
5
Pobrania
118
Wydruki
0
Wyświetlenia
729
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Designed and printed this mainboard case for my own delta with the goal of keeping wires away from the stepper drivers, while also utilizing an 8080 Noctua Redux Fan for quiet, high-performance cooling. Assembly was performed with an assortment of generic self-tapping screws. The case itself takes a BTT SKR V1.4 Turbo board (should fit a SKR V1.4 and similar boards as well). 

Note: the .stl has been edited to correct some tolerance issues and to allow the use of T-nuts for mounting. Pictures are not reflective of the most recent revisions.

Tagi