GK420d & GX420d Left Bearing (Roller clip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Left bearing roller clip for GK420d & GX420d thermal zebra printers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Left bearing roller clip for GK420d & GX420d thermal printers.
Couldn't find a clip for the left side of the roller so I converted the existing right clip into a left.
While the original listed here; https://www.thingiverse.com/thing:3689058 , is for the right side, it was too tight for me so I modified it. You can find my modified version (right clip) here: https://www.printables.com/model/365110-gk420d-gx420d-right-bearing-roller-clip
Slice with the tab in the upright position as shown in the rendering. Supports are necessary
Slicer settings
Layer Height: 0.2
Infill: 100%
Support Placement: Touching Buildplate
Support Overhang Angle: 30°
The printed pieces shown were printed with a 0.6 nozzle. While it worked ok, I would recomend a 0.4 nozzle. Presliced model uses a 0.4 nozzle
Fit can be a little tight at first but after some repetitive movements, it loosens up nicely.