GK420d & GX420d Left Bearing (Roller clip)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Left bearing roller clip for GK420d & GX420d thermal zebra printers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 134
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Left bearing roller clip for GK420d & GX420d thermal printers.
Couldn't find a clip for the left side of the roller so I converted the existing right clip into a left.
While the original listed here; https://www.thingiverse.com/thing:3689058 , is for the right side, it was too tight for me so I modified it. You can find my modified version (right clip) here: https://www.printables.com/model/365110-gk420d-gx420d-right-bearing-roller-clip
Slice with the tab in the upright position as shown in the rendering. Supports are necessary
Slicer settings
Layer Height: 0.2
Infill: 100%
Support Placement: Touching Buildplate
Support Overhang Angle: 30°
The printed pieces shown were printed with a 0.6 nozzle. While it worked ok, I would recomend a 0.4 nozzle. Presliced model uses a 0.4 nozzle
Fit can be a little tight at first but after some repetitive movements, it loosens up nicely.