1 / 3
IKEA SEKTION CABINET LEG TALL SET OF 4 — zdjęcie 1
1 / 3

IKEA SEKTION CABINET LEG TALL SET OF 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My wife and I are tall people and needed a taller cabinet for our new kitchen cabinets from IKEA.

Ocena
0 / 5
Polubienia
5
Pobrania
69
Wydruki
0
Wyświetlenia
1003
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

My wife and I are tall people and needed a taller cabinet for our new kitchen cabinets from IKEA. So I created a taller tube for the IKEA plastic legs. If a shorter leg is needed the tops can be cut off in the slicer. no bottom caps are needed and the rings fit nicely. They are approximately 75mm 3" longer than the standard legs when threaded all the way in. I used a higher temperature in the Gcode due to having a nozzle X please adjust accordingly.

Print instructions

I printed these in .20(SPEED) PETG default with 100% concentric infill and layers. Remember to always inspect the preview in slices prior to printing. These tubes are a snug fit on the legs.

Tagi