1 / 1
Interactive Board Toy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a four-section interact board with multiple different interactive activities built in.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
Print Instructions:
0.2mm Layer Height.
PLA (or any other filament).
Supports are required for most parts with overhangs.
Printed on ender 3.
Bill of Materials:
Magnets
Bearing
Beads
Assembly Instructions:
All segments snap together using the build snap connectors.
Rotating Assembly:
- Press fit the bearing into the pilot hole in the assembly.
- Glue the rotating arm into the bearing.
- Place beads evenly in the four sections.
- Glue on the top cover.
Magnet Shapes:
- Glue the 3mm magnets into the shape on the board and on the corresponding peg
- Make sure the magnets are on the right side around (or the magnets will push away).
- OPTIONAL: Attach the shapes to the board with a string, so they do not get lost.
Spinning Assembly:
- Press fit the bearings into the sides of the rotating columns.
- Press fit the mount into the bearing, and press fit the mount into the chassis of the board.
- Use glue if necessary, but it should not be required.
Textured Mat:
- In the slicer (Cura), select the texture tool.
- Select the desired amount of texture for the shapes