1 / 1
Interactive Board Toy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a four-section interact board with multiple different interactive activities built in.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 27
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Print Instructions:
0.2mm Layer Height.
PLA (or any other filament).
Supports are required for most parts with overhangs.
Printed on ender 3.
Bill of Materials:
Magnets
Bearing
Beads
Assembly Instructions:
All segments snap together using the build snap connectors.
Rotating Assembly:
- Press fit the bearing into the pilot hole in the assembly.
- Glue the rotating arm into the bearing.
- Place beads evenly in the four sections.
- Glue on the top cover.
Magnet Shapes:
- Glue the 3mm magnets into the shape on the board and on the corresponding peg
- Make sure the magnets are on the right side around (or the magnets will push away).
- OPTIONAL: Attach the shapes to the board with a string, so they do not get lost.
Spinning Assembly:
- Press fit the bearings into the sides of the rotating columns.
- Press fit the mount into the bearing, and press fit the mount into the chassis of the board.
- Use glue if necessary, but it should not be required.
Textured Mat:
- In the slicer (Cura), select the texture tool.
- Select the desired amount of texture for the shapes