1 / 4
The Recreator 3D  - Community bottle cutter 6mm to 12mm for 10 or 2 cent coins · EURO — zdjęcie 1
1 / 4

The Recreator 3D - Community bottle cutter 6mm to 12mm for 10 or 2 cent coins · EURO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of the Community bottle cutter for people living in Europe. It needs two 10 cents coins (two 2 cents coin works fine too) instead of two Pennies.

These are for the wider version of the cutter (the new one).

With these files to print you can cut your bottle strips from 6mm to 12mm with 0.5 mm steps.

I recommend inserting threaded brass inserts in the Middle part of the community cutter, so you don't have to change the length of the screws every time and you can always use the longest one. Otherwise, consider that the higher the height, the longer the screw will have to be.

 

Cutting width change with bottle thickness.

Tagi