Models to Install LED Light in the Modular Lantern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project contains a model as a base for LED strips and three different diffusers for the modular lantern.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This project contains all model files and instructions to print the adapters and diffusers to install LED lights in the modular lantern.
Read all details about the electronics here.
Related Projects
How to Print Cylinder Base LR2268-71

Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm or 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Three perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
How to Print Diffuser LR2268-61

Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm or 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Vase Mode Print! |
| Prusa Slicer Profile: | “0.2mm Quality” |
How to Print Diffuser LR2268-62

Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Three perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
| Fuzzy Skin: | Height from 4.00–58.0: All walls. Height from 58.0-100.0: Outer walls. |
How to Print Diffuser LR2268-63
Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm or 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Vase Mode Print! |
| Prusa Slicer Profile: | “0.2mm Quality” |
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights: