1 / 1
3 of Hearts - low poly heart, voronoi, smooth
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have a heart, give a heart, break a heart. Which will you chose?
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 1121
- Wydruki
- 12
- Wyświetlenia
- 2316
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 12) (Komentarze: 14)Remiksy (2)Kolekcje (138)Powiązane
Printing instructions for
Voronoi: I recommend a 5mm Outer brim if you don't want surprises from the bottom of your heart. Make sure you're using dry filament if you have excessive stringing.
Low Poly: Easiest make and scalability. You can print with 0 infill and be lighthearted or up to 90% if you want a heavy heart. I never recommend 100% infill or you might have a heart attack.
Smooth: Or try “fuzzy skin” if you have a change of heart.
No supports needed for any of these models. Sorry, I would add more but I ran out of puns.