1 / 1
3 of Hearts - low poly heart, voronoi, smooth
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have a heart, give a heart, break a heart. Which will you chose?
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 1,121
- Makes
- 12
- Views
- 2,316
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
Printing instructions for
Voronoi: I recommend a 5mm Outer brim if you don't want surprises from the bottom of your heart. Make sure you're using dry filament if you have excessive stringing.
Low Poly: Easiest make and scalability. You can print with 0 infill and be lighthearted or up to 90% if you want a heavy heart. I never recommend 100% infill or you might have a heart attack.
Smooth: Or try “fuzzy skin” if you have a change of heart.
No supports needed for any of these models. Sorry, I would add more but I ran out of puns.