Hexbit Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More Hexbit Handles - Magnetic!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Lots of these out there alread - more of a fun exercise for me to design my own. These handles are great for squeezing into snug places or maybe just convenience.
There is a 2mm recess in the bottom of the bit slot for a 6mmx3mm magnet to help hold your bits in place. Put a drop of glue on the magnet and set it in place.
Printing Tips
Designed for total wall/perimeter thickness of 2mm. If you use a 0.6 nozzle - go with 4 walls, or 5 walls for a 0.4 nozzle. The walls from the circular pattern of through holes will help reinforce the walls of the bit slot this way.
No supports, use a rigid material.
The bit slots will be ever so slightly snug. If too tight, reduce your flow multiplier a few percent.