Hexbit Handles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More Hexbit Handles - Magnetic!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Lots of these out there alread - more of a fun exercise for me to design my own. These handles are great for squeezing into snug places or maybe just convenience.
There is a 2mm recess in the bottom of the bit slot for a 6mmx3mm magnet to help hold your bits in place. Put a drop of glue on the magnet and set it in place.
Printing Tips
Designed for total wall/perimeter thickness of 2mm. If you use a 0.6 nozzle - go with 4 walls, or 5 walls for a 0.4 nozzle. The walls from the circular pattern of through holes will help reinforce the walls of the bit slot this way.
No supports, use a rigid material.
The bit slots will be ever so slightly snug. If too tight, reduce your flow multiplier a few percent.