1 / 2
Dimple Die for 12.5mm, 1/2", half inch holes. Tested on 1mm aluminum and steel — zdjęcie 1
1 / 2

Dimple Die for 12.5mm, 1/2", half inch holes. Tested on 1mm aluminum and steel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a dimple die for dimpling 12.5mm/ half inch holes. It's been tested on 1mm aluminum and steel and works great.

Ocena
4,5 / 5
Polubienia
28
Pobrania
229
Wydruki
2
Wyświetlenia
1191
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

A friend needed a dimple die for a small job and didn't want to buy a tool he might never need again so I drew up one for him and printed it out. This had a radius not a a 45° which I think looks better. 
This is a dimple die for dimpling 12.5mm/ half inch holes. It's been tested on 1mm aluminum and steel and works great. 
It can be used in a press, vise or you can put penny washers on the outside and used a nut and bolt to pull them together. The one I did in the picture I did in my vise with heavy penny washers to spread the load.
If you need a different size let me know.
Printed in PLA. 
5 walls, top and bottom.
40% gyroid infill. 

Tagi