Dimple Die for 12.5mm, 1/2", half inch holes. Tested on 1mm aluminum and steel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dimple die for dimpling 12.5mm/ half inch holes. It's been tested on 1mm aluminum and steel and works great.
- Rating
- 4.5 / 5
- Likes
- 28
- Downloads
- 229
- Makes
- 2
- Views
- 1,191
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A friend needed a dimple die for a small job and didn't want to buy a tool he might never need again so I drew up one for him and printed it out. This had a radius not a a 45° which I think looks better.
This is a dimple die for dimpling 12.5mm/ half inch holes. It's been tested on 1mm aluminum and steel and works great.
It can be used in a press, vise or you can put penny washers on the outside and used a nut and bolt to pull them together. The one I did in the picture I did in my vise with heavy penny washers to spread the load.
If you need a different size let me know.
Printed in PLA.
5 walls, top and bottom.
40% gyroid infill.