Standard Doorbell to Ring Doorbell Mounting Plate adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt your original two-screw doorbell to a Ring Doorbell plate without power tools. Designed for slim walls and masonry
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I built this model both to practice 3D Modeling and to help out a friend of mine. Their home has a brick outer wall and he received a Ring Doorbell as a gift. Rather than let him drill through the brick, I told him I could design an adapter to fit his existing setup. This replaces the generic 2 screw doorbells that come on cookie-cutter homes in the US. You can find what I'm talking about by going to homedepot or lowes and sorting from low to high.
It's designed to print without supports and to use four M5 nuts/bolts. You can use a heat inset to secure the nuts to the print or longer bolts to compensate. Since it will be outside I recommend PETG or similar. If it's covered you can probably get away with PLA for a while, since it doesn't see a lot of direct sun.