Modular Gridfinity storage for hex bits, 1/8, 1/4, 8mm bits, or small parts.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a way to minimise filament usage on Gridfinity storage. This design means I can mix and match and reuse boxes.
- Ocena
- 5 / 5
- Polubienia
- 789
- Pobrania
- 2169
- Wydruki
- 29
- Wyświetlenia
- 15 316
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I designed this to allow me to mix and match storage options while using the same box design. The removable holders can store hex bits, 3.2 (1/8") and 6.4mm (¼") and 8mm router/dremel bits, or small parts. Boxes can also be divided up into parts with dividers.
Each box can hold 5 dividers giving a current capacity of 20 bits in a 2x1 box.
Includes two box options, one with standards Gridfinity magnets, and one using a single 10x3mm magnet in the middle.
I'll expand on this idea in the future.
Update 16/01/23 - Added 4mm hex bits option. loosened tolerances on 1/8 and ¼ bit holders.
Added 3.5mm hex bits option for slightly smaller hex bits.
Update 22/01/23 - Added partition and end labels.
Update 03/02/23 - Added 8mm bit partition.