Raspberry Pi 4 Aluminum Heatsink with PWM Controllable Fan Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added this heat-sink/fan for cooling my Raspberry PI4B, I wanted a fan guard to protect the blades from wires.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I added this heat-sink/fan for cooling my Raspberry PI4B, I wanted a fan guard to protect the blades from wires. I use this with the Prusa-Box modular panel.
Link to heat-sink:
https://www.amazon.com/gp/product/B091L1XKL6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Print as shown and no supports needed (.2 layer) I used a longer M2 x 12 self tapping screw to mount the Pi board to the modular board, on the edge with the heat-sink leg. I used regular M2.5 x 16 screw for the guard to heat-sink. (I made a last second update so pictures are a little diff)
I soldered 90 degree pins on the bottom for the hookup of ground and Global_En pins.
Used to hard reset.