1 / 5
ECM Classika external water reservoir
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This raiser for the cup warmer allows a tube from the water reservoir to exit the machine at the back.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Using an external water reservoir allows for easy access under low overhang cabinets and also prevents the water from heating with the machine.
Only minimal modifications are necessary:
- add a tube (5 mm inner diameter, 8 mm outer diameter works well) inside the original water reservoir as shown in the photo
- block the water level indicator with some aluminium foil so it stays at the top position
- screw the raiser (i.e. this print) onto the cup warmer with four M5 screws (10 mm)
- add an external reservoir (e.g. a simple bottle or a nice glass cylinder - still looking for one…)
The raisers will become warm, so printing with PETG is preferable to PLA. A layer height of 0.3 mm is sufficient.