1 / 5
ECM Classika external water reservoir
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This raiser for the cup warmer allows a tube from the water reservoir to exit the machine at the back.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 535
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Using an external water reservoir allows for easy access under low overhang cabinets and also prevents the water from heating with the machine.
Only minimal modifications are necessary:
- add a tube (5 mm inner diameter, 8 mm outer diameter works well) inside the original water reservoir as shown in the photo
- block the water level indicator with some aluminium foil so it stays at the top position
- screw the raiser (i.e. this print) onto the cup warmer with four M5 screws (10 mm)
- add an external reservoir (e.g. a simple bottle or a nice glass cylinder - still looking for one…)
The raisers will become warm, so printing with PETG is preferable to PLA. A layer height of 0.3 mm is sufficient.