58 models
note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8 this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file. this for the use for a 300mm barrel and this can be…
For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.
I made a new magnetic funnel for my portafilters. I own a Bezzera BZ10 (used to own a Gaggia Classic) and an open basket portafilter with an IMS B702TH26.5M basket. The Outer Diameter is about 70mm for my portafilter. The E61 variant has…
Wall mount for CoPrint systems KCM and ECM modules. Includes both Combined and individual mounts, as well as 8-in-1 PTFE guide tube spacers for that cleaner look. Various sizes included for printer tolerances. Cable management tracks…
I wanted to have switched control over the two different 12v circuits (12v constant and 12v switched) used to make the harness. Included in the pictures is a mini diagram i drew and the part numbers for the two rocker switches i used. You…
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Since I learned the ECM S64 coffee grinders have a huge retention area (dead space?) filled with old, already ground beans, I wanted to convert it to a single dosing grinder with a smaller hopper. I took the dimensions of the MOAB Mother…
This holder can be attached to the upper rim of the mug-tray of my ECM Mechanika espresso machine. An ECM portafilter can be stored in the device. In the back, there is one recess to add fabric pads for proper alignment and to create a…
in case you have a hard time finding the metal pipe for the original Barrel Reducing tool. then here is a 22mm OD version. also I made it so it can be clamped down with hose clamps. besides that fallow the ECM v3 instructions on how to…
Additional parts needed VecMulti Multicard (2018 version with SD-slot mounted on separate PCB) 6 wires, approx 30mm length soldering iron de-soldering tool self tapping screw, max 18mm length Post-Printing De-solder the SD-slot PCB from…
Co Print ChromaHead, ChromaPad, KCM and ECM provided from the Co Print github https://github.com/coprint/Series-II-Product-Models Why upload them? well I was looking for a model of the ChromaHead, ECM, KCM and CX-1 Extruder to allow for…
Simple desk or tabletop soundbar stand for Hisense-HS2100 soundbar, this is designed with a slight tilt up . No supports are needed with this model and should take approximately 1.5 hours to print at 0.2 with 20% infill, depending on…
This is a pretty holder for the ECM WDT Tool. This is based on Printables 750392. I did re-model the original file in Fusion 360 and adapted it to the height / angles of the ECM WDT Tool. For printing, I printed it with black PLA, 100%…
I designed these mounts so that they could use t-slot nuts to mount onto my Neptune 4 Max. These can be mounted on any slotted rail. I used M5 t-slot nuts and M5-8 bolts.
A reasonably detailed replica of the french prototype VTOL fighter. Wikipedia: https://en.wikipedia.org/wiki/SNECMA_Col%C3%A9opt%C3%A8re Most of the aircraft was designed with blueprints from this website:…
Selection of UK trolley coins to represent your favourite console Tested at Morrisons, ASDA, Tesco, ALDI and a few other random stores. Update: Also recently tested in lockers at local swimming pool which worked perfectly (3d Prints save…
This is my adapter to use the transmitter from Sony's ECM-W2BT Bluetooth mic as a handheld microphone. Easy to print, easy to use. You simply slide the transmitter into the slot, and you are ready to go. Set the input to -10dB to not…
If the side of a table in Heroquest misses, you cant juse it anymore, with is why i created this model.
abgewandelte Version für ECM Siebträgermaschinen mit breiter Umrandung (müsste auch für Technika und Synchronika passen) obere Maße wurden geändert um den Halter in die breite Umrandung der Tassenablage einzuhängen für die Maschine…
Made specifically for Tecmojo 1U Rack Mount 19 Outlet PDU Power Distribution Unit Power Strip Circuit Breaker (SKU# 13111901) but may fit others. Fits snug enough where you might not need adhesive, but still recommended (I used double…
I created this portafilter funnel because the one I printed for my previous coffee machine was not fitting properly for the new one (ECM Puristika). I took the dimensions of the VST filter basket, and designed this model to fir the…
This model is part of my Ikea Skadis range. For this model you will also need to print the pegs that attached it to the board. If the pegs are to lose or you wish to make more permanent you can add a little superglue to the ends of the…
Replacement ECM Bracket for C5 Corvette. Recommend Polymaker Fiberon PA612-CF15 filament. Category: Automotive
Quick and easy model I made in TinkerCAD for my Profitec Go once i realised that i got wrong filters for the machine, and there was nothing on the internet i could find for a fix. Smaller hole goes onto the bottom of the tank, then the…
Elecmon Digimon Creature Model
This holder can be attached to the upper rim of the mug-tray of my ECM Mechanika espresso machine. An ECM tamper can be stored in the device. In the back, there are two recesses to add fabric pads for proper alignment and to create a…
Side Panels for Tecmojo 12U Open Frame Rack These are custom side panels designed to fit the Tecmojo 12U Open Frame Network Rack (as found here on Amazon ). They add a clean, finished look to the otherwise open design, while also…
For mounting a Sony ECMCS3 stereo microphone on a camera hot shoe. Category: Camera
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
There are two requirements I wanted to solve with the remix: Get rid of the uneven coffee distribution in E61 coffee compartments, which was the original use of the shaker cup, like described in the original print project. Grind for a…
Was making a different addon to the OEM knob when I decided to model up and make an old red steam valve. First one in PETG couldn't handle the heat, so I went back in to CAD and made a higher temp insert part. I have printed mine in Sunny…
External cooling fan for Century motor found in some Jandy and Jacuzzi pool pumps. The pump is about $1800, and the fan is a $20 part. My fan was broken and the pump was excellent (after rebuild) so I had a beautiful $1800 (plus tax)…
When using the drainage container kit, you need to unscrew a bolt and a nut from the drip tray. ECM Sychronika has already a 15mm hole in the chassis, but it's to large for these parts. This adaptor solves the problem.
A simple adapter to mount ECM8000 to a shock mount made for mics like the generic chinese BM800 you find on aliexpress. Outer diameter is 43.5mm, inner diameter is 21.1mm (ECM8000 is 21mm). There is a fillet on the outer edge indicating…
If you use waterfilters in the tank of an ECM Classika PID coffeemachine, e. g. Brita AquaAroma Crema or something similar, you need to buy an additional adapter. I bought Filters from Waterdrop and printed the adapter with PETG. Filters:…
Small remix to make this tool holder printable without supports and to have an more "organic" look
Using an external water reservoir allows for easy access under low overhang cabinets and also prevents the water from heating with the machine. Only minimal modifications are necessary: add a tube (5 mm inner diameter, 8 mm outer diameter…
This holder can be attached to the upper rim of the mug-tray of my ECM Mechanika espresso machine. An amazon distributorcan be stored in the device (mind the plastic stock-holder of the distributor is reused). In the back, there is one…
Wanted a handle that I could flick on and off. Ended up modelling the OEM part then making this to fit, there's 2 versions, one where the handle aligns with the bump on the original, and one that aligns to the gap between them, so you can…
The rubber bumpers on the water tank lid of my ECM Synchronika melted, so I designed this as a replacement. The original were 12.5mm x 12.5mm, but the rim of the lid is closer to 10mm, so I also included a 10mm x 12.5mm. Probably fits…
The opening at the bottom serves to avoid dirt accumulation and to prevent a stored 58mm tamper from getting wet. The model is optimized for a layer height of 0.3mm, with a 0.2mm height for the first layer. The infill should be rather…
After three years of using my ECM knock box, the black silcone 20 mm X 10 mm X 155 mm tubing began to split. I was unable to find a replacement tubing that would work. Designed in Fusion 360. I made the bar hole 11 mm to help the metal…
This is a adaption for ECM or Profitec Grinders to support the great Smart Grind-by-Weight project. For details visit https://github.com/jaapp/smart-grind-by-weight It is specifically designed for the NA6 1kg Load Cell available under…
To adjust the bracket, it is necessary to use M3x10 bolts and M3 nuts.
I use small espresso shot cups, and using the scale over the Puristika's tray is a very high drop from the portafilter. I've created this model to get the scale a little bit closer to the portafilter and don't get all the cabinet painted…
this is a KCM and Ecm holder that screws onto the back of your printer but was originally made for the Adventurer 5m.
This is a replacement drawer pull for NavePoint or TecMojo 19in rack drawers. These notoriously pop out from contents on the inside pushing them out.
MHW-3BOMBER Espresso Shot Mirror isn't magnetic to hold to the machine by itself (and even the Puristika does not have a flat surface large enough to install it), so I created this model with 6x magnets (6x3mm) that can be press fitted to…
Height: 20 mm. Attach using 6x30mm wood screw to the stand to use it in narrow spaces
I was sick of cleaning all the small gaps in the Drawer of the ECM Knockbox, so I designed this inlay that can go into the dishwasher. Now I have two that can be interchanged while one is being washed. The model was printed in PP-CF to be…
Replacement Cover for TecMojo Standard Series Wall Mount Rack / Network Cabinet. Use this to replace a missing or broken cover, or customize your cover to allow cable passthru without compromising airflow. Print the cover on its back.…
Convert a single Sony ECM-44B lavaliere microphone clip to a dual microphone clip. May work with another lavaliere microphone of the same diameter of 8.5mm.
I was sick of cleaning all the small gaps in the Drawer of the ECM Knockbox, so I designed this inlay that can go into the dishwasher. Now I have two that can be interchanged while one is being washed. The model was printed in PP-CF to be…
this is a KCM and Ecm holder that screws onto the back of your printer but was originally made for the Adventurer 5m.
ECM Tamper Station Drip Tray Insert This custom insert fits into the ECM Tamper Station and collects water droplets that drip from the tamper when it remains in the portafilter after tamping. Features: - Perfectly sized to fit the ECM…
SONY ECM-G1 is equipped with a microphone connection terminal, but when using it in styles other than attaching it to a camera, I had trouble securing the main body. So, to make the most of it in activities like web conferences, I…
This is just an xbox one/series controller stand with a space to add your name if required. The back has space for storage of 2 spare AA batteries. Bottom has cut-outs to add felt, rubber or something to the base to protect your…
![[finecoar] ECM Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766061/images/5982864_9c70ff66-6d52-4e13-b1bf-5b9580317063_780aa5e2-6121-47c9-9bbd-193a05cf52dd/p1040372.jpg)
