1 / 3
E61 Shaker Redistribution Dosing Cup for ECM 64 Grinder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The E61 Shaker Redistribution Dosing Cup perfectly fits beneath an ECM 64 Grinder. No funnel needed for clean grinding.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
There are two requirements I wanted to solve with the remix:
- Get rid of the uneven coffee distribution in E61 coffee compartments, which was the original use of the shaker cup, like described in the original print project.
- Grind for a multiple of regular espresso coffee shots for use in a normal filter machine or manual filtering. Obviously, a whole can of coffee needs some more coffee to be grinded… In parallel, get rid of the extra funnel I normally use for grinding with my ECM 64 grinder. So the height of the shaker cup had to be optimized to fit.
I had my difficulties in getting round edges on the baseplate of the shaker cup after cutting off the lower part of the original shaker cup. In the end, I had to create an extra Fusion360 body to successfully round the edges. This is not a groundbreaking work of remix. Nevertheless, I attached the Fusion360 sources.
Nothing special for the print settings. PET-G, 0.2mm layer height, no supports.
Have lots of good coffee!